Press Release

NASA, ESA’s Solar Orbiter Set to Explore Sun with Johns Hopkins APL-Developed Camera and Particle Detector

Fri, 02/07/2020 - 14:00

NASA and the European Space Agency’s jointly led Solar Orbiter mission is scheduled for launch Feb. 9 from Cape Canaveral Air Force Station, Florida — and riding aboard it will be a high-energy particle detector developed by the Johns Hopkins Applied Physics Laboratory (APL) in Laurel, Maryland, as well as a high-tech camera that APL contributed science support in developing.

The Solar Orbiter mission aims to study how the Sun creates and controls the heliosphere, an 11-billion-mile-wide protective bubble of charged particles and magnetic field lines surrounding the solar system. Orbiting as close as a quarter of the distance between Earth and the Sun, the spacecraft will create a one-of-a-kind, comprehensive picture of the Sun’s atmosphere and inner workings, and how they can affect the space environment farther out in the solar system.

It will capture the highest-resolution images of the Sun’s face ever taken, gather measurements in the spacecraft’s environment and use Earth’s and Venus’ gravity to slingshot it out of the ecliptic plane to image the Sun’s poles, which have never been viewed before. From there, the spacecraft will sweep up new information on explosive flares and coronal mass ejections that propel particles from the Sun’s surface at nearly the speed of light, which can threaten astronauts and space-based technologies, and capture images and measurements to help researchers deduce what creates the Sun’s powerful magnetic field.

The Suprathermal Ion Spectrograph (SIS) sensor, shown here in a clean room at Johns Hopkins APL in Laurel, Maryland, funnels energetic particles through two telescopes
The Suprathermal Ion Spectrograph (SIS) sensor, shown here in a clean room at Johns Hopkins APL in Laurel, Maryland, funnels energetic particles through two telescopes. It determines what elements those particles are by carefully timing how long it takes each to fly through the instrument.

Credit: Johns Hopkins APL

These data will complement the APL-led Parker Solar Probe, launched by NASA in 2018 to study the Sun’s atmosphere and solar wind. With Parker’s up-close view — ultimately within 4 million miles of the Sun’s surface — and various conjunctions of the two spacecraft to provide multiple vantage points of the same magnetic field lines and flow of materials from the Sun, the missions will combine to provide a never-before-seen global view of our star.

Included in Solar Orbiter’s comprehensive suite of instruments is the Suprathermal Ion Spectrograph, or SIS. Designed and built at APL, SIS is one of four sensors in an instrument suite that will determine the composition of energetic electrons, protons and heavy ions flooding from the Sun. SIS is a highly sensitive mass spectrometer that can determine elements from helium to iron by measuring how long it takes a particle to fly through the instrument.

“We care about particle composition because it’s a tracer of where they came from within the Sun,” said George Ho, a space physicist at APL and the principal investigator of SIS.

Although researchers already know the composition of the solar wind, Ho explained, solar events such as flares and coronal mass ejections can alter that composition. In the solar wind, for example, the ratio of helium isotopes — atoms of the same element whose mass differs only by their number of neutrons — can be as much as 1,000 times higher after certain types of explosive solar events.

“Only certain nuclear reactions and temperatures can produce those compositional changes,” Ho said, and because only certain regions of the Sun meet those conditions, scientists can then deduce where those particles came from.

SIS funnels particles through a series of three ultrathin foil sheets. Detectors signal when a particle passes through each foil, and SIS takes very precise measurements of the time between each signal to calculate how fast the particle was moving. From that information, the instrument can determine the particle’s mass, which tells what kind of element and isotope it is.

“APL pioneered measuring energetic particles in space,” Ho said, citing NASA’s Voyager 1 and 2 missions, launched in 1977, that carried a low-energy charged particle detector designed at APL.

A simulation video of Solar Orbiter Heliospheric Imager’s (SoloHI) field of view (yellow circle) as it peers around Solar Orbiter’s heat shield. APL participated in the development of SoloHI, which will image very dim light scatter from electrons within the solar wind. The simulation used data from the SECCHI camera on NASA’s Solar Terrestrial Relations Observatory.

Credit: Angelos Vourlidas/Johns Hopkins APL

APL is also participating in the Solar Orbiter Heliospheric Imager, or SoloHI. Peering around the edge of Solar Orbiter’s heat shield, SoloHI will capture images of light scattered by electrons in the solar wind. These data will allow scientists to observe disturbances in the wind, including those that arise from explosive events on the Sun.

Seeing that light scatter, though, isn’t easy. For one, a cloud of dust left over from when the planets formed (and replenished regularly by crumbling comets as they zip by, among other sources) stretches across the solar system — and it’s very bright.

“It’s a bit of a nuisance,” said Angelos Vourlidas, a solar physicist at APL and the project scientist for SoloHI. Part of SoloHI’s objective will be to quantify how the dust’s brightness changes with distance from the Sun so that researchers can account for it in solar models.

But light scattered from electrons is also just dim.

“Even if you were standing at the top of Mount Everest, watching the faintest clouds in the night sky blow by, those are still too bright,” Vourlidas said.

Those clouds may be at the limit that a human eye can see — about 1 billion times dimmer than the Sun. SoloHI is trying to see light that’s from 100 to 1,000 times fainter than that.

Capturing a dimly lit scene on a camera usually means keeping it pointed at one spot with its shutter wide open for minutes or even hours. That way, the sensor collects as much light as possible. But, Vourlidas explained, you can’t do that in space. Particles and radiation would saturate the sensor.

To solve that challenge, SoloHI’s interior is filled with blackened plates that cut the background light to only one-trillionth of the Sun’s brightness. The instrument avoids saturating its sensor by taking from 5 to 20 photos every hour, each about 40 seconds long. It then compares the images, “scrubs” individual pixels for any overexposure, sums their exposures and relays a final image to Earth.

The information and images Solar Orbiter produces — combined with results from Parker Solar Probe — will provide scientists with unparalleled data about our Sun.

SIS was built by Johns Hopkins APL in collaboration with Christian-Albrechts-Universität zu Kiel.

SoloHI was designed and constructed by the United States Naval Research Laboratory with science support from APL, the Jet Propulsion Laboratory, Centre Spatial de Liège, Rutherford Appleton Laboratory, the University of Göttingen, Laboratoire d’Astronomie Marseille and the Institut d’Astrophysique Spatiale.